Synthesis method of lithium carbonate

Aug 05, 2023 Leave a message

1. Comprehensive utilization of brine: brine is extracted from the lithium bearing liquid by adding soda ash to remove calcium and magnesium ions in the liquid, adding hydrochloric acid to acidize, evaporating to remove sodium chloride, removing iron, and then adding excess soda ash to precipitate lithium carbonate, then washing, centrifugation, and drying to produce lithium carbonate products.
2. Lime sintering method: spodumene concentrate (generally containing 6% lithium oxide) and limestone according to 1:(2.5 ~ 3) weight ratio. Mixed grinding, sintered at 1150 ~ 1250 ℃ to produce lithium aluminate and calcium silicate, wet grinding, leaching lithium hydroxide with washing solution, sedimentation filtration, filter residue return or washing to remove slag, leaching solution through evaporation concentration, then add sodium carbonate to produce lithium carbonate, and then centrifuge separation, drying, lithium carbonate product.
3. Using lithium hydroxide and carbon dioxide as raw materials, high-purity lithium carbonate can be prepared, and lithium sulfate and sodium carbonate can also be used as reactants, but lithium carbonate is easily soluble in other salt solutions, so the yield is not too high, generally about 75%, and the product will contain a small amount of lithium sulfate.
4. Sulfuric acid method: the molten spodumene reacts with sulfuric acid, and then reacts with sodium carbonate after purification.
5. Lime method: the calcined spodumene is reacted with lime milk, purified and then reacted with sodium carbonate.
6. By-product method: Extraction from mother liquor containing lithium after barium chloride production by well salt brine.
7. Using industrial lithium hydroxide as raw material, after heating water to dissolve it, filter out the insoluble matter, while hot, pass clean carbon dioxide gas into the filtrate until it no longer generates precipitation, while hot filter, shake dry, wash with hot distilled water to qualified, and dry at 110℃. The industrial lithium carbonate is dissolved in cold water, after filtration, the filtrate is boiled, stop heating, filter while hot, wash in hot water, shake dry, dry, can also produce reagent lithium carbonate.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry