Daily Storage and Transportation of Ethylene Glycol Dicarboxylate

May 13, 2025 Leave a message

Ethylene Glycol Dicarboxylate is an important pharmaceutical intermediate and fine chemical raw material, widely used in polymer synthesis, pharmaceutical preparations and other fields. Due to its relatively active chemical properties, special attention should be paid to stability, safety and compliance during storage and transportation to avoid degradation, contamination or safety accidents.

 

​​1. Storage conditions and requirements ​​

(1) Environmental control ​​

Temperature: It is recommended to store in a cool environment at ​​15-25°C, avoiding high temperature (>30°C) that may cause decomposition or polymerization.

Humidity: Relative humidity should be controlled at ​​≤60% to prevent moisture absorption from affecting purity.

Light: It needs to be stored away from light (use brown glass bottles or aluminum foil packaging) to avoid ultraviolet rays causing side reactions.

(2) Packaging selection ​​

Inner packaging: HDPE (high-density polyethylene) or glass containers are preferred to avoid direct contact with metals (such as iron and copper).
Outer packaging: Add moisture-proof bag + desiccant, and mark with "Keep Dry".

(3) Isolated storage
Avoid mixing with strong oxidants (such as peroxides) and strong acids/bases to prevent reaction risks.

If it is in solid form, it needs to be sealed to prevent dust; liquid form needs to prevent leakage (use secondary containers).

 

2. Key points of transportation management

(1) Compliance labels and documents

Transport classification: Confirm whether it is a hazardous chemical based on the UN number and CAS number (if there is no special hazard, it is usually transported as an ordinary chemical).

Safety Data Sheet (SDS): Must be provided with the goods, including physical and chemical properties, emergency treatment measures, etc.

Transport label: Mark "Keep Away from Heat/Moisture".

(2) Choice of transportation method

​Transportation method​​ ​​Applicable scenarios​​ ​​Precautions​​
​​Road transport​​ Short distance, small batch Shockproof packaging to avoid severe bumps
​​Sea transport​​ International bulk transportation The container needs to be moisture-proof to avoid salt spray corrosion
​​Air transport​​ Emergency small quantity transportation Comply with IATA "Dangerous Goods Regulations" (if applicable)

(3) Temperature control and monitoring
If cold chain transportation is required (such as high temperature sensitive products), use an insulated box + ice pack or a constant temperature vehicle.
Real-time temperature recorders are recommended to ensure that the temperature control data throughout the process can be traced.

info-730-730
info-725-725
info-730-730

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry